Restart Ur Friend Mobile Via SMS


With this Trick only 1110,1110i,1112,1100,2100 can be Restarted.
Just type

Ever wanted to know when your PC was last turned on by someone at home or office? Often there arises a situation when you desperately want to know the start up time, the reasons may be endless.Without using any software's you can find it easily by just checking the system log.You can get the complete information from the log file



Steps you need to follow:

1. Start >> Control Panel >> Performance and Maintainence  
2. Administrative tools >> Computer management >> Event viewer   

Click on the system log and find the time when your PC was last on


You can now check everything including when your computer was On ,Off,Sleeped ,Logged on and off etc.

Change Yahoo messenger title bar......
Hey guys you can change the yahoo messenger title bar...... 
For this just find the folder messenger in the drive in which the messenger is installed. Then search a file named "ymsgr". In this file just go to the end and write the following code:
[APP TITLE]
CAPTION=prakash-pctips
Here you can write any name in place of prakash-pctips......
then see the fun.......
You can have your own name being placed in yahoo messenger title bar

If you have important documents ;-) and you are afraid about its privacy then do not be worried because windows XP provides (not officially) a utility by which u can hide your PC’s one or more drives....



1. Go to Start > run > type diskpart.
A dos window will appear with following.
DISKPART>
2. Then type list volume
This will look like it
Volume### Ltr Label Fs Type Size Status Info etc in a row and details beneath.
Volume 0 F DC-ROM
Volume 1 C NTFS Partition 7000MB Healthy
Volume 2 D soft NTFS Partition 8000MB Healthy
Volume 3 E —- NTFS Partition 8000MB Healthy
3. If u wanna hide drive E then type select volume 3 and hit enter.
Then a message will appear in same winwods {Volume 3 is the selected volume}
4. Now type remove letter E
A message will come {Diskpart Removed the Drive letter}
Sometime it requires the reboot the computer. And your E drive is vanished from sight.....



Diskpart will remove the letter. Windows XP is not having capabilty to identify the unkown volume.

Now Do not be afraid. Your data will ramain safe.
To revert changes, repeat the process . but in 4th step replace “remove” with “assign”
I mean type “assign letter E”

Your drive will reappear again.

21. HARD DISK MAKING NOISE WHILE PROCESSING
a. Unstabilized power supply.
b. Check for Loose Contact.
c. Do not use Y Connectors for Hard Disk.
d. It may create Bad Sector OR Weak Hard Disk.

22. HARD DISK HANGS WHILE PROCESSING
Check for Bad Sector by using CHKDSK or SCANDISK Command. If found format the Hard Disk and set Partition before that area.(This is the only procedure to use Hard Disk with Bad Sector) OR (To avoid Bad Sectors use Standard Power Supply)

23. HARD DISK NOT DETECTED
a. Check Power Connector
b. Check Data Cables
c. Check Jumpers

24. PARTITION NOT SHOWN
Operating System where the Hard Disk formatted is not supported with present Mother Board. For Eg: Hard Disk formatted with Pentium System will hide their partitions for 486 System.

25. MMX/DLL FILE MISSING
May the above files may be corrupted due to power failure or Virus. Make available above files from other Computer. OR Reinstall Windows 98 Operating System. (This procedure will not make any effect on existing Data).

26. WINDOWS REGISTRY ERRORThis will happen due to sudden ON/OFF of the system. Final solution is to Reinstall Operating System.

27. DISPLAY COLOUR DOES NOT MATCH
a. Configure Display Card properly with their CD.
b. The Standard setting for Windows is set it to 800x600 for better performance.

28. UNKNOWN DEVICE FOUND
May the Driver utility is not provided with operating system . Insert Driver CD and install software for the above Device. (Every Device requires driver utility to set active

11. SHOWING HDD ERROR OR HARD DISK FAILURE
a. Check Power Cord
b. Check connection of HDD
c. Check Data cable
d. Check Hard Disk parameters in CMOS or Auto detecting Setting Partitions by Fdisk Command, then format it to set track 0.

12. MOTHER BOARD HANGS DUE TO UNSTABILIZED POWER SUPPLY
a. Check S.M.P.S
b. RAM not functioning properly.
c. Software problem (due to using pirated software)
d. CPU fan not functioning properly.

13. DANCING SCREEN
a. Check Display card connection
b. Virus Problem
c. Video Memory Problem

14. SHAKING SCREEN
a. Earthing problem
b. Magnetic waves comes around.

15. CPU CABINET SHOCK
a. Check Earthing
b. Check main power cord.

16. NON-SYSTEM DISK ERROR
a. Floppy Drive having different disk (Non-Bootable Disk) OR CMOS Parameters for Hard Disk may not be set properly.
b. Hard Disk Partitions may not be created.
c. Hard Disk may not be formatted.

17. MISSING OPERATING SYSTEM
The System files missing namely Ie; command.com} - User File IO.SYS & MS_DOS.SYS } - Hidden Files. These above three files required for Start up of the system that can be transferred by using SYS C: Command OR While the time of formatting by using Format c:/u/s

18. MISSING COMMAND INTERPRETOR
May the file Command.com is corrupted OR Infected by Virus OR Some one has Erased it.

19. SHOWING I/O ERROR
a. The type of Hard Disk in CMOS may not be set properly.
b. Operating system used for formatting is not valid

20. SHOWING DIVIDE OVER- FLOW MESSAGE
a. May some Directories or Files crash with other files.
b. Use CHKDSK/F or SCANDISK Command to correct it.

1. MONITOR LED IS BLINKING
Check all the connections like Monitor Cable, Data cables,RAM, Display Card , CPU connections.

2. CONTINUOUS THREE BEEPS
Problem in RAM Connection.

3. THREE BEEPS
( 1 Long 2 Short)
Problem in Display Card Connection

4. THREE LONG BEEPS PERIOD WISE
Problem in BIOS or RAM (Basic Input Output System)

5. CONTINUOUS NON-STOP BEEPING
Key Board Problem (I.e.; Some Key is pressed for Longer time)

6. HDD LED IS GLOWING CONTINUOUSLY
Data cable to be connected properly (twisted cable).

7. NO DISPLAY ON THE SCREEN AT ALL
Hard Disk cable connected wrongly. Connect rightly seeing the Red mark (Faces power supply) and then Restart.

8. POWER LED IS OFF
a. Check main power cord
b. Check S.M.P.S.
c. Check Mother Board connection

9. SHOWING CMOS ERROR
Replace 3 Volt battery of Mother Board . Set Original Settings Manually.(Refer CMOS Setup chart)
Enter your search termsSubmit search form

10. SHOWING FDD ERROR OR FLOPPY DRIVE IS NOT WORKING PROPERLY
Check Power cord of FDD , Data Cables , set CMOS & Finally the Check drive.

Many times we find that the folder options missing in windows explorer

Here is the solution for that

How to Restore folder Option.....
Following a few simple steps to get this problem resolved:

1st Solution  to Fix Folder Options Missing: Edit registry setting

1. Navigate to “HKEY_CURRENT_USER | Software | Microsoft | Windows | CurrentVersion | Policies | Explorer”
2. At right panel, look for a value called “NoFolderOptions”, delete the value.
3. Go to “HKEY_LOCAL_MACHINE | Software | Microsoft | Windows | CurrentVersion | Policies | Explorer”
4. Repeat step 3 to delete NoFolderOptions entry.

 2nd Solution to Fix Folder Options Missing: Change setting in Group Policy

 Go to Start -> Run. Type gpedit.msc and press enter
- Expand User Configuration -> Administrative Template -> Windows Components.
- Click on Windows Explorer
- Locate Removes Folder Options menu from Tools menu in the right pane.
- Doubleclick on it and choose Disabled or Not Configured and click OK.

It will 100% work in Windows XP.

 

1. To speed up your windows or to increase RAM virtually,
Right click on My Computer
>> Properties
>> Advanced
>> Performance - Settings
>> Advanced
>> Virtual Memory - Change
Keep the initial size same as recommended and maximum size double of it then restart your system.
It will improve speed of windows and you can play some games which require higher

2. When a window is active, press the F11 key of the keyboard to get the biggest window possible and press F11 again to restore it.

You can chage your processor name, using Windows Registry.
For example my processor is P4 but when i open my system information in that it will  Show Core 2 Duo.
Changing the Name processor is just for Fun, and also first step of Learning to Edit Registry.

FOLLOW THE BASIC STEPS :

1. Open your Registry : To open your Registry click Run > Regedit and click  OK , it will popup a window called Registry Editor
2. In that on the left hand side you can see a tree structure in that click HKEY _LOCAL_MACHINE
3. In that click Hardware > Description > System > CentralProcessor > 1
4. Now you can see many files in the right side, in that double click Processor Name String.After Clicking little Window Will Pop Up
 5. In that Write the what ever wish for example core 2 duo, even your name ...etc
6. To chage again do the same....

This is an interesting one!!!

This is for those who watch movies on their computer's dvd rom drive!!!
There is a software called dvd idle pro which can really increase the life of your dvd drive. By using the Smart Read-ahead Cache,
DVDIdle saves DVD data which will be played soon onto the hard disk cache or RAM cache, and
then feeds it to DVD player.
This allows the DVD drive to rest.
For example:
a 6X-speed DVD drive will only work for 15 minutes when you are watching a 90 minutes DVD
movie.

here is the link: http://www.dvdidle.com/download/DVDIdlePro59.exe

Recently when I tried to copy some files to my mmc using card reader it showed me some error saying the disk is write-protected. Remove the write protection or use another disk.
It was working fine before. I have used this card many times before but it never gave any error and suddenly it started showing this error. After going through some forums I came to know that it happens because of write protection notch but there was no such notch or switch on my card.I kept on searching on more forums and after some time I found one solution to this problem. Follow the steps given below if you are also facing the same problem.

1. Run Registry Editor (regedit).
2. Navigate to the following registry key:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
3. Right click on control and create new key.
4. Name it as StorageDevicePolicies . (Copy and paste it from here if possible)
5. Now click on StorageDevicePolicies and in right side pan right click and select create new dword and name it as WriteProtect.
6. Double click on it and set its value to 0.
7. Now restart your machine and try copying some files to your card.